THANK Y O U
You’ve just
purchased a
lighting product
designed and built
to provide you
with many years of
enjoyment.
MERCI
Vous venez
d’acheter un
luminaire conçu
pour vous donner
des années de
plaisir.
GRACIAS
Usted acaba de
adquirir un
excelente producto
de alumbrado
disenado y
construido para
proveerle muchos
años de satisfaccion.
1 3 4 3 6
INSTRUCTIONS
• Please read all instructions prior to installation.
• Installation of this fixture must comply with local building codes.
• Installation of this fixture must be done by a qualified electrician.
• Veuillez lire toutes les instructions avant l’installation.
• L’installation de ce luminaire doit être faite selon le code local de
construction.
• L’installation de ce luminaire doit être faite par un électricien
qualifié.
• Favor de leer toda las instrucciones antes de comenzar la instalacion.
• La instalacion de esta luminaria (este producto) debera de cumplir con los
codigos locales de construccion.
• La instalacion de esta luminaria (este producto) debera ser realizada por
un electricista calificado.
Tools Required • Outils Nécessaires • Herramientas Requeridas
INSTALLATION & CONNECTIONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT: Use a qualified electrician for installation of this lighting fixture.
INSTALLATION INSTRUCTION
1. Turn off power at main fuse box.
2. Install crossbar assembly complete with nipple and canopy chain loop to junction box as
one complete assembly (Fig. 1).
3. Remove loop ring (B) from canopy loop (C). Slip canopy (D) over loop (C) and secure
by fastening loop ring (B). Adjust the height of the nipple so canopy will sit flat against
ceiling and tighten locknut (A) against crossbar (E).
4. Remove loop ring (B) and canopy (D) from ceiling.
5. Assemble chandelier as per photo but do not weave wire through chain links yet.
6. Hold chandelier up against canopy loop (C) with chain and adjust to desired height.
Remove excess chain.
7. Before fastening chain onto canopy loop (C), weave chandelier wire through every
second link.
8. Let the canopy loop ring (B) slip to the bottom of chain. Repeat this step for canopy (D).
9. Tighten chain onto canopy loop (C).
10. Weave wire through the canopy loop and into junction box.
11. Install ground wire of chandelier to ground screw or ground wire of junction box or
ground screw on crossbar.
12. Connect black wire of power supply to the smooth side of the wire (flexible cord) from
the chandelier and connect white wire of power supply to the ribbed side of the wire
from the chandelier. NOTE: Always use wire connectors or marrettes (included) to
connect wires and push all excess wire and connections back into junction box.
13. Lift canopy up to ceiling covering junction box and secure by using canopy loop ring.
GLASS AND BULB INSTALLATION
1. Slip candle covers (F) over sockets.
2. Install 60W Max. B10 Bulbs (not included).
3. Install decorative arm plates (G) over arm screws and secure with decorative caps (H)
4. Install 40W Max type B10 bulb (Not included) into bottom center socket
5. Slip bottom center glass (I) over mounting arm (J), then add rubber washer (K) and metal
washer (L) and secure all by fastening locknut (M) over the nipple of mounting arm (J). Do
not over tighten!
6. Mount decorative plate (N) over glass bowl (I) and secure plate (N) by fastening finishing
cap (O) over nipple of mounting arm (J). Do not over tighten!
TURN ON POWER
ENJOY YOUR EUROCLASSICS™ LIGHTING PRODUCT
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals